Crease and Board Tester

 Crease and Board Tester

The Crease & Board Stiffness Tester measures the stiffness, spring back and the crease strength. The instrument is suitable for paper and board. The stiffness and spring back is measured at 15? angle and 50mm. The crease is measured at 90? angle and 10mm.

Specifications:

This user friendly instrument measures the stiffness at 50mm and 15 degrees and the crease line at 10mm and 90 degrees. Both stiffness and spring back can be measured. A spring loaded clamp secures the sample. The clamp is manually rotated towards the fixed position. During a test, the continuous force value is displayed. When the test time of 15 seconds is completed, the maximum force is displayed. The instrument can be supplied with square clamps and/or round cornered clamps (Philip Morris method).

Features:

>> Spring loaded clamp

>> Easy to use

>> Measures 15 degrees at 50mm

>> Measures 90 degrees at 10mm

>> Export option to GraphMaster software

>> Available with square clamps and/or

>> Round cornered clamps (PM method)

>> 15 second measurement delay (BS 6965:1)

>> Calibration weights included

>> Cutter included

International Standards:

> BS 6965:1

> BS 3748

> PMI 068

> BS ISO 2493-1

> TAPPI T 556 (15 degrees only)

> Scan P29

Applications:

> Flex testing

> Hardness/Stiffness

Crease & Board Stiffness Tester mengukur kekakuan, pegas kembali dan kekuatan lipatan. Instrumen ini cocok untuk kertas dan papan. Kekakuan dan pegas kembali diukur pada 15? sudut dan 50mm. Lipatannya diukur pada 90? sudut dan 10mm.

Spesifikasi:

Instrumen yang ramah pengguna ini mengukur kekakuan pada 50mm dan 15 derajat dan garis lipatan pada 10mm dan 90 derajat. Kekakuan dan pegas kembali dapat diukur. Penjepit pegas mengamankan sampel. Penjepit diputar secara manual ke arah posisi tetap. Selama pengujian, nilai gaya kontinu ditampilkan. Ketika waktu pengujian 15 detik selesai, gaya maksimum ditampilkan. Instrumen ini dapat dilengkapi dengan klem persegi dan/atau klem bersudut bulat (metode Philip Morris).

Fitur:

>> Penjepit pegas

>> Mudah digunakan

>> Mengukur 15 derajat pada 50mm

>> Mengukur 90 derajat pada 10mm

>> Opsi ekspor ke perangkat lunak GraphMaster

>> Tersedia dengan klem persegi dan/atau

>> Klem bersudut bulat (metode PM)

>> penundaan pengukuran 15 detik (BS 6965:1)

>> Anak timbangan kalibrasi disertakan

>> Pemotong disertakan

Standar Internasional:

> BS 6965:1

> BS 3748

> PMI 068

> BS ISO 2493-1

> TAPPI T 556 (hanya 15 derajat)

> Pindai P29

Aplikasi:

> Pengujian Flex

> Kekerasan/Kekakuan